Brother International HL-2600CN Service Manual - Page 262
Cooling Fan EX 2, Remove the set screws 3 pcs. and disconnect the harness connector of the cooling
![]() |
View all Brother International HL-2600CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 262 highlights
4.4.2 Cooling Fan (EX) 2 1) Remove the paper exit filter (with case) from the cooling fan (EX) 2. 2) Remove the set screws (3 pcs.) and disconnect the harness connector of the cooling fan (EX) 2 to remove the cooling fan (EX) 2 from the P. EX frame assembly. P. EX frame assembly Cooling fan (EX) 2 Paper exit filter (with case) Fig.7-71 Note: When assembling the cooling fan (EX) 2, be sure that the motor face attached the rating label is set to the outside. VII-51
![](/manual_guide/products/brother-international-hl2600cn-service-manual-a175c80/262.png)
VII-51
4.4.2
Cooling Fan (EX) 2
1) Remove the paper exit filter (with case) from the cooling fan (EX) 2.
2) Remove the set screws (3 pcs.) and disconnect the harness connector of the cooling
fan (EX) 2 to remove the cooling fan (EX) 2 from the P. EX frame assembly.
Fig.7-71
Note:
When assembling the cooling fan (EX) 2, be sure that the motor face attached the rating
label is set to the outside.
P. EX frame assembly
Cooling fan (EX) 2
Paper exit filter (with case)