Brother International HL-2600CN Service Manual - Page 139

Code No. 12-1 12-2 13 14-1 14-2 LCD Message NO TRAY UPP/LOW Description of Message The engine is idling. The Power LED is lit. 12 NO TRAY [*1] [*4] STACKER FULL 12 STACKER FULL [SF] REPLACE TONER 13 REPLACE [*5] TONER [*4] * Display of [4] C : YT Y Toner Cartridge C : CT C Toner Cartridge C : MT M Toner Cartridge C : KT K Toner Cartridge CHECK FUSER OIL 14 CHECK FUSER OIL[*F0] CHECK CLEANING ROLLER 14 CHK CLEANING ROLLER [*FC] [*1]: Paper feeder without the paper cassette is indicated as follows; /UPP: Upper Cassette /LOW: Lower Cassette Install the applicable media cassette to the paper feeder indicated on the LCD. Engine stands by as "STACKER FULL" status. The Power LED is lit. Remove the paper on the stacker (paper exit tray) , and then press - button. The engine is idling. The Power LED is lit. [*5]: The toner empty condition is indicated by the color code as follows; Y: Yellow M: Magenta C: Cyan K: Black Replace the indicated toner cartridge with a new one of the correct color. The engine is idling. The Power LED is lit. Replace the fuser oil bottle with a new one. This message will be automatically cleared by open & close operation of the paper exit cover. The engine is idling. The Power LED is lit. Replace the cleaning roller with a new one. Execute the Clear Care Mode after the replacement of the cleaning roller to clear the Care Code [FC]. V-14