Brother International HL-2600CN Service Manual - Page 241
Developer Drive Unit 2, 2.16 Toner Sensor ASSY TPD, Disconnect the connector to the toner sensor ASSY.
View all Brother International HL-2600CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
4.2.15 Developer Drive Unit 2 1) Remove the set screws ST3X6 (4 pcs.) from the developer drive unit 2. 2) Remove the developer drive unit 2 from the frame. Developer drive unit 2 Fig.7-43 4.2.16 Toner Sensor ASSY (TPD) 1) Remove the set screws ST3X6 (2 pcs.) from the toner sensor ASSY. 2) Disconnect the connector to the toner sensor ASSY. Note: If the optional lower tray unit is fitted, remove the left hand screw of the front cross rail to release the media cassette guide. Fig.7-44 VII-30 Toner Sensor ASSY (TPD)
VII-30
4.2.15
Developer Drive Unit 2
1)
Remove the set screws ST3X6 (4 pcs.) from the developer drive unit 2.
2)
Remove the developer drive unit 2 from the frame.
Fig.7-43
4.2.16 Toner Sensor ASSY (TPD)
1) Remove the set screws ST3X6 (2 pcs.) from the toner sensor ASSY.
2) Disconnect the connector to the toner sensor ASSY.
Note:
If the optional lower tray unit is fitted, remove the left hand screw of the front cross rail to
release the media cassette guide.
Fig.7-44
Developer drive unit 2
Toner Sensor ASSY (TPD)