Brother International HL-2600CN Service Manual - Page 141

Code No. 16-3 16-4 16-5 16-6 LCD Message ALIGN TONER CG Description of Message The engine is idling. The Power LED is lit. 16 ALIGN [*5] TONER CG [*4] [*5]: The color of the incorrectly installed toner cartridge will be indicated as follows; Y: Yellow M: Magenta C: Cyan K: Black ALIGN BELT CG 16 ALIGN BELT CG [*4] ALIGN LFU 16 ALIGN LFU [*4] ALIGN TRANSFER ROLLER 16 ALIGN TRANSFER ROLLER [*4] Reinstall the toner cartridge correctly. This message will be automatically cleared by open & close operation of the front cover. The engine is standstill. The Power LED is lit. The OPC belt cartridge is not installed. Reconfirm the installation status of the OPC belt cartridge. This message will be automatically cleared by open & close operation of the paper exit cover or front cover. Engine stands by as "ALIGN LFU" status. Turn the power off, and then connect the harness between the engine and LFU. Turn the power on. If the warming-up process starts, it means that proper connection is made. Engine stands by as "ALIGN TRANSFER ROLLER" status. The Power LED is lit. Transfer roller is not installed. Reconfirm the installation status of transfer roller. This message will be automatically cleared by open & close operation of back cover (L). V-16