Brother International HL-2600CN Service Manual - Page 140

Code No. 14-3 15 16-1 16-2 LCD Message CHECK WASTE TONER PACK 14 CHECK WASTE TONER PACK[*4] MISPRINT 15 MISPRINT [*6] [*4] ALIGN FU.UNIT 16 ALIGN FU.UNIT [*4] ALIGN FUSER CL ROLLER 16 ALIGN FUSER CL ROLLER [*4] Description of Message The engine is idling. The Power LED is lit. Replace the waste toner pack with a new one. This message will be automatically cleared by open & close operation of the paper exit cover taking place while replacement of the waste toner pack. The message is cleared also by pressing the - button. The engine is idling. The Power LED is lit. [*6] The type of misprint will be indicated as follows; NOPQR: No PRREQ-N signal is available. PAPER: No paper is available in the feeder while executing the print operation after receipt of the print command. MEDIA: While executing the print process after receipt of print command, the media type of feeder is not consistent with the specified media type. Misprint occurred while the Duplex printing. This message can be cleared by pressing the - button. The engine is standstill. The Power LED is lit. The fusing unit is not installed. Reconfirm the installation status of the fusing unit. This message will be automatically cleared by open & close operation of the paper exit cover. The message is cleared also by pressing the - button. The engine is idling. The Power LED is lit. The cleaning roller is not installed. Reconfirm the installation status of the cleaning roller. This message will be automatically cleared by opening & closing the paper exit cover. The message can also be cleared by pressing the button. V-15