Brother International HL-2600CN Service Manual - Page 362
remove the waste toner feeder unit., iii Vacuum toner around the other side
![]() |
View all Brother International HL-2600CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 362 highlights
2) Drum cleaner 2 i) Remove the cleaner cover by releasing the two hooks. ii) Holding the handle located on the top of the drum cleaner 2, push it backwards. iii) Remove the drum cleaner 2 by lifting it out. Handle Drum cleaner 2 iv) Clean the area where the drum cleaner 2 is mounted with a vacuum cleaner and a cloth. (Refer to the figure as shown on the right.) 3) Inside the printer i) Remove the upper side cover, side cover (L), and upper cover from the printer. ii) Remove the control fan, and then remove the waste toner feeder unit. Waste toner feeder unit iii) Vacuum toner around the other side of the waste toner feeder tube and inside the printer. (Refer to the figure as shown on the right.) iv) Reassemble the waste toner feeder unit, control fan, upper cover, side cover (L), and upper side cover. v) Re-install the drum cleaner 2 and cleaner cover. Transfer drum 2 A-16
![](/manual_guide/products/brother-international-hl2600cn-service-manual-a175c80/362.png)