Brother International HL-2600CN Service Manual - Page 276

4.6.2 Transfer Roller 2 1) Lift the transfer roller lock levers at the right and left hand sides to remove the transfer roller 2 from the transfer unit 2. Transfer lock lever Transfer roller 2 Fig.7-91 Transfer unit 2 4.6.3 Registration Roller 2 1) Remove the roller fixing C rings from both ends of the roller. 2) Remove the gear from the shaft (right hand side). 3) Remove the plastic bushes at both ends. 4) Remove the shaft support from the frame while pressing down on the pressure roller to release the pressure from the registration roller 2. 5) Remove the registration roller 2. C ring Plastic bush Registration roller 2 Fig.7-92 Transfer unit 2 Plastic bush Gear C ring VII-65