Brother International HL-2600CN Service Manual - Page 207

2.7 Paper Pick-up Roller and Separator Pad 2 Replacement The paper pick-up roller and separator pad 2 should be replaced with new ones according to the periodical maintenance cycle set out in Table 6-4. When time is due for replacement of the paper pick-up roller and separator pad 2, the following message appears on the control panel. (The display is blinked.) REPLACE 120K KIT They also should be replaced when paper feed jams occur. 1) Whenever paper feed jams occur, confirm the cause by following the information in Section 3 of Chapter VIII. 2) If the paper jam still occurs, replace the paper pick-up roller and separator pad 2 referring to Section 4.6.6 of Chapter VII. Separator pad 2 Paper pick-up roller Fig.6-32 CAUTION This is one of the periodic replacement items, not customer service. It should be implemented upon request of the customer or at periodic maintenance. After replacement, confirm the improvement of feeding for the normal paper, transparency, thick paper, etc. VI-36