Brother International HL-2600CN Service Manual - Page 294

3. PAPER TRANSPORT ERROR Paper is transported through the path shown in Fig.8-1. Paper jams at the following locations are easily cleared. Paper Pick-up Roller Fusing Unit Transfer unit 2 Paper Exit Unit Fusing Unit Paper Exit Roller Oil Bottle Drum cleaner 2 OPC Belt Cartridge Top Cover Paper Exit Unit Transfer unit Paper discharger Unit Transfer roller 2 Transfer drum 2 Registration roller 2 Paper Pick-up Roller 3.1 Feed Jam K Y M C Fig.8-1 Toner Cartridge Media Cassette Problem Item Print Paper Media Cassette Paper Pick-up Roller / Separation Pad 2 Step 1 2 3 4 5 6 7 8 9 Check Item Is the print paper a recommended paper? Is the print paper damp? Was the paper fanned before loading in the media cassette? Is the print paper set in place? Is the end plate properly set up? Is the paper stacked above the line on the paper guide? Is there paper dust around the paper guide? Is the print paper caught in the paper feeding part? Is the paper pick-up roller damaged? Result NO YES NO NO NO YES YES YES YES Action Use a recommended paper. Replace the existing paper with new. Fan the paper before loading. Set the paper in the correct place. Set the end plate to meet the paper size. Stack the paper below the line. Clean the paper guide with a cotton cloth. Remove the paper. Service call required to replace the damaged paper pick-up roller.