Brother International HL-2600CN Service Manual - Page 290
Size Error T1/2, No Tr Roller
![]() |
View all Brother International HL-2600CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 290 highlights
Display Message NO LFU Install the lower tray unit. NO TR ROLLER Install the transfer roller 2. ILLEGAL TONER Use only Brother genuine toner cartridges. NO TRAY 1/2 The indicated paper Tray was not detected, install it, or ensure it is inserted correctly. SIZE ERROR T1/2 Specify the correct paper size for the indicated tray. SIZE ERROR DX The duplex unit can only print in the sizes specified. Specify the correct paper size. STACKER FULL Remove the paper from the output tray. MEDIA MISMATCH Media mismatch between the Printer and the Printer Driver setting. Load XX into Tray . SIZE MISMATCH Paper mismatch between the Printer and the Printer Driver setting. Load Paper size into Tray . MANUAL FEED Load paper into tray1 and press GO. MEDIATYPE ERROR Specify the correct media type : XX. NO FUSING UNIT A fusing Unit was not detected, please install one. CARD ERROR An error when accessing the Flash card, check the drive is formatted and not in Write Protect mode. HDD ERROR An error occurred accessing the HDD, power cycle the printer and check that it is formatted. DIMM ERROR Ensure that the DIMM is installed correctly. CARD REMOVAL The Flash card was removed while the printer was powered on. Power cycle the printer. BUFFER ERROR Check the cable connection between the computer and printer. STORAGE FULL There is no space on the Hard Disk. Remarks XX = Plain Paper, Transparencies, Thick Paper XX = T1, T2, DX
![](/manual_guide/products/brother-international-hl2600cn-service-manual-a175c80/290.png)