Brother International HL-2600CN Service Manual - Page 373
Paper&tray Size, Parallel Menu, Reprint On/off, Auto Hrc Off, Cdcc Psw = L
![]() |
View all Brother International HL-2600CN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 373 highlights
PAPER&TRAY SIZE Specifies the default paper size. DEF PAPER =LT The default paper size is letter for the US and Canada models. DEF PAPER =A4 The default paper size is A4 for the other models. PARALLEL MENU Changes the signal timing of the Centronics interface PARALLEL TIMING CDCC PSW = L The BUSY signal gets high when the STROBE signal goes up. CDCC PSW = H* The BUSY signal gets high when the STROBE signal goes down. STB / ACK DELAY CDCC BSSL = H The ACK signal is output when the BUSY signal goes down. CDCC BSSL = L* The ACK signal is output before the BUSY signal goes down. INPUT PRIME INPUT PRIME = OFF* The INPUT PRIME signal does not reset the printer. INPUT PRIME = ON The INPUT PRIME signal resets the printer. REPRINT ON/OFF Specifies that the reprint function is enabled or disabled forcedly. REPRINT = ON* The reprint function is enabled or disabled following the setting of the user menu. REPRINT = OFF The reprint function is enabled forcedly. AUTO HRC OFF Specifies that the smoothing control is enabled or disabled automatically depending on the contents of the file. AUTO HRC = OFF* AUTO HRC = ON A-27
![](/manual_guide/products/brother-international-hl2600cn-service-manual-a175c80/373.png)