Brother International HL-2600CN Service Manual - Page 238

4.2.11 WT Holder ASSY 2 1) Open the front cover 2. 2) Remove the waste toner box. 3) Remove the set screw BT3X8 (1 pc.) to remove the cover (FR) by pulling the cover (FR) forwards to release the lower hook. 4) Remove the set screw ST3X6 (1 pc.) to remove the WT holder ASSY 2 from the frame. Plastic tube WT holder ASSY 2 Front cover 2 Lower hook Fig.7-37 Cover (FR) 4.2.12 Developer Clutch 2 (C, M, Y, K) 1) Remove the outer plastic C ring of each developer clutch 2 from the shaft. 2) Pull out the developer clutch 2 from the shaft. Developer clutch 2 C ring Fig.7-38 VII-27