Brother International MFC-7160C Users Manual - English - Page 41
Paper Specifications for Casette and Manual Feed Slot, For optimum output quality
View all Brother International MFC-7160C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
26 CHAPTER THREE s Brother coated (ink jet) paper is coated only on one side. Make sure this whiter (coated) side is facing up toward you. Therefore, when loading paper in the paper cassette, make sure that the whiter side (the coated side) is facing up. s The coated side of glossy paper is shiny. Do not touch the shiny side. Load glossy paper in the feeder with the shiny side facing up toward you. s DO NOT touch the coated side of the paper or both sides of Transparencies, because it absorbs water and perspiration easily, and might cause decreased output quality. s For optimum output quality, be sure to use paper appropriate for your resolution setting. s Store paper in the original bag, and keep it sealed. Keep the paper flat and away from moisture and direct sunlight and heat. s Transparencies designed for laser printers/copiers may stain your next document. Use only recommended transparencies. Paper Specifications for Casette and Manual Feed Slot Paper Type Paper Size Cassette Capacity Cut Sheet Letter, Executive 200 Sheets of 20 lb(75 g/m2) Legal 100 Sheets of 20 lb(75 g/m2) Coated Paper Letter 100 Sheets Transparencies Letter 20 Glossy Paper Letter 20 Envelopes DL, COM-10, C5, 10 B5, Monarch Organizer J(Manual Feed Slot Only), K, L 10 Paper Capacity for Feeder Cut Sheet Paper Weight 16 to 32 lb (60 to 120 g/m2 ) Sheet Feeder: Up to 0.87 inches (22mm) / Approximately 200 sheets of 20 lb (75 g/m2 ) Output Stacker: Approximately 75 Sheets of 20 lb (75 g/m2) Transparencies and glossy paper must be picked up from the paper tray one page at a time.