Brother International MFC-7160C Users Manual - English - Page 73
Real Time Transmission, Checking Job Status, Canceling Jobs in Memory
View all Brother International MFC-7160C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
58 CHAPTER SEVEN See Canceling Jobs in Memory below See Checking Job Status above Real Time Transmission When memory is full, the MFC cannot continue scanning documents into memory before sending. However, you can turn on REALTIME TX. 1 Insert the document in the feeder. 2 Press Function , 1 , 3 , 9 . 3 The screen displays 9. REAL TIME TX 4 Press or to choose NEXT FAX ONLY or ON. 5 Press Set . 6 Press Stop to exit. 7 Enter the fax number and press Start . 8 As soon as the phone line is free, the MFC starts dialing and sending the fax. Checking Job Status You can check which jobs are in memory waiting to be sent. Press Function , 1 , 4 to check it. While the MFC is sending or receiving a fax, press Stop . The screen displays job numbers. Press or to see them. Canceling Jobs in Memory You can cancel tasks you've scheduled, such as Polling Transmit, as well as all faxes waiting in Memory to be sent. 1 Press Function , 1 , 4 . Any waiting jobs appear on the display. If nothing is waiting, the screen displays NO JOB WAITING. 4.REMAINING JOBS 2 If you have more than two jobs waiting, use or to select the job you want to cancel. Press Set when the screen displays your selection. -OR- If you have only one job waiting, go to step 3. 3 Press 1 to cancel-OR-Press 2 to exit without canceling. 4 Press Stop to exit.