Compaq nc6120 Hardware and Software Guide - Page 132
Adding a Memory Module to the Expansion Memory Module Slot
View all Compaq nc6120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Hardware Components Adding a Memory Module to the Expansion Memory Module Slot To add or replace a memory module in the expansion memory module slot: 1. Shut down the notebook. (If you are not sure whether the notebook is off or in hibernation, turn the notebook on by pressing the power/standby button. Then shut down the notebook through the operating system.) 2. Disconnect all external devices connected to the notebook. 3. Disconnect the power cord. 4. Turn the notebook upside down. 5. Remove any battery packs from the notebook. 6. Loosen the memory module cover screw 1. 7. Lift the memory module cover 2 away from the notebook. Hardware and Software Guide 5-21
Hardware Components
Hardware and Software Guide
5–21
Adding a Memory Module to the Expansion
Memory Module Slot
To add or replace a memory module in the expansion memory
module slot:
1. Shut down the notebook. (If you are not sure whether the
notebook is off or in hibernation, turn the notebook on by
pressing the power/standby button. Then shut down the
notebook through the operating system.)
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord.
4. Turn the notebook upside down.
5. Remove any battery packs from the notebook.
6. Loosen the memory module cover screw
1
.
7. Lift the memory module cover
2
away from the notebook.