Compaq nc6120 Hardware and Software Guide - Page 188
Changing DriveLock Passwords, Security > Password options >, Require password on restart
View all Compaq nc6120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
Security 3. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the "F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen. ❏ To change the language, press f2. ❏ For navigation instructions, press f1. 4. Use the arrow keys to select Security > Password options > Require password on restart. 5. Toggle the field to enable or disable, and then press enter. 6. Save your preferences by using the arrow keys to select File > Save Changes and Exit. Then follow the instructions on the screen. Your preferences are in effect when the notebook restarts. Changing DriveLock Passwords To access the DriveLock settings in Computer Setup: 1. Shut down the notebook. If you are not sure whether the notebook is off or in hibernation, turn the notebook on by pressing the power/standby button, and then shut down the notebook through the operating system. 2. Be sure that the hard drive is inserted into the notebook (not into an optional docking device or external MultiBay). 3. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the "F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen. ❏ To change the language, press f2. ❏ For navigation instructions, press f1. 4. Use the arrow keys to select Security > DriveLock passwords, and then press enter. 5. Use the arrow keys to select the location of the hard drive, and then press f10. Hardware and Software Guide 7-15