D-Link DGS-3426 User Manual - Page 102
SNMP Group Table Configuration window, Parameter, Description, Group Name
View all D-Link DGS-3426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Figure 6- 58. SNMP Group Table Configuration window The following parameters can set: Parameter Description Group Name Type an alphanumeric string of up to 32 characters. This is used to identify the new SNMP group of SNMP users. Read View Name This name is used to specify the SNMP group created can request SNMP messages. Write View Name Specify a SNMP group name for users that are allowed SNMP write privileges to the Switch's SNMP agent. Notify View Name Specify a SNMP group name for users that can receive SNMP trap messages generated by the Switch's SNMP agent. Security Model SNMPv1 - Specifies that SNMP version 1 will be used. SNMPv2 - Specifies that SNMP version 2c will be used. The SNMPv2 supports both centralized and distributed network management strategies. It includes improvements in the Structure of Management Information (SMI) and adds some security features. SNMPv3 - Specifies that the SNMP version 3 will be used. SNMPv3 provides secure access to devices through a combination of authentication and encrypting packets over the network. Security Level The Security Level settings only apply to SNMPv3. NoAuthNoPriv - Specifies that there will be no authorization and no encryption of packets sent between the Switch and a remote SNMP manager. AuthNoPriv - Specifies that authorization will be required, but there will be no encryption of packets sent between the Switch and a remote SNMP manager. AuthPriv - Specifies that authorization will be required, and that packets sent between the Switch and a remote SNMP manger will be encrypted. To implement your new settings, click Apply. To return to the SNMP Group Table, click the Show All SNMP Group Table Entries link. 88