D-Link DGS-3426 User Manual - Page 163
Parameter, Description, Loopdetect Status, Interval 1-32767, Recover Time 0 or, Port Configuration
View all D-Link DGS-3426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch The following fields may be configured: Parameter Description Loopdetect Status Choose whether to globally enable or disable the Loopback Detection function by using this pull-down menu. Interval (1-32767) Enter a time interval, between 1 and 32767 seconds, that CTP packets will be dispatched from Loopback Detection enabled ports. If this packet is returned, the port will be disabled. The default setting is 10 seconds. Recover Time (0 or 60-1000000) Enter a time, in seconds that a port will have to wait before being recovered from a Loopback Detection shutdown. The user may set a time between 60 and 1000000 seconds with a default setting of 60 seconds. The user may also enter a time of 0, which means that the port can only be recovered manually by the user. This is done by going to the Port Configuration folder located in the Administration folder and manually enabling these ports using the Port Settings window. From... To Choose a port or group of ports that are to be enabled for the Loopback Detection function. State Use the pull-down menu to enable or disable the Loopback function for the selected ports. Click Apply to implement changes made. 149