D-Link DGS-3426 User Manual - Page 263

xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Parameters Description Box ID Displays the Switch's order in the stack. User Set Box ID can be assigned automatically (Auto), or can be assigned statically. The default is Auto. Type Displays the model name of the corresponding switch in a stack. Exist Denotes whether a switch does or does not exist in a stack. Priority Displays the priority ID of the Switch. The lower the number, the higher the priority. The box (switch) with the lowest priority number in the stack denotes the Primary Master switch. MAC Address Displays the MAC address of the corresponding switch in the switch stack. PROM Version Shows the PROM in use for the Switch. This may be different from the values shown in the illustration. Runtime Version Shows the firmware version in use for the Switch. This may be different from the values shown in the illustrations. H/W Version Shows the hardware version in use for the Switch. This may be different from the values shown in the illustration. Topology Show the current topology employed using this Switch. My Box ID Displays the Box ID of the Switch currently in use. Master ID Displays the Unit ID number of the Primary Master of the Switch stack. Backup Master Displays the Unit ID of the Backup Master of the switch stack. Box Count Displays the number of switches in the switch stack. Module Information The Module Information display shows information about any installed modules. To view this window click, Monitoring > Module Information. Figure 11- 3. Module Information window Module information displayed: Parameter Description ID The slot number where the module is installed. Module Name The full name of the module installed. Rev. No. The version of the installed module. Serial The serial number of the module. Description A brief description of the type of module. 249