D-Link DGS-3426 User Manual - Page 73
System Severity Settings, System Severity Settings
View all D-Link DGS-3426 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
xStack DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch System Severity Settings The Switch can be configured to allow alerts be logged or sent as a trap to an SNMP agent or both. The level at which the alert triggers either a log entry or a trap message can be set as well. Use the System Severity Settings menu to set the criteria for alerts. The current settings are displayed below the System Severity Table. Click, Administration > System Severity Settings, to view the window shown below. Figure 6- 25. System Severity Settings Use the drop-down menus to configure the parameters described below. Parameter Description System Severity Severity Level Choose how the alerts are used from the drop-down menu. Select log to send the alert of the Severity Type configured to the Switch's log for analysis. Choose trap to send it to an SNMP agent for analysis, or select all to send the chosen alert type to an SNMP agent and the Switch's log for analysis. Choose what level of alert will trigger sending the log entry or trap message as defined by the Severity Name. Select critical to send only critical events to the Switch's log or SNMP agent. Choose warning to send critical and warning events to the Switch's log or SNMP agent. Select information send informational, warning and critical events to the Switch's log or SNMP agent. Click Apply to implement the new System Severity Settings. 59