Dell OptiPlex GX300 User Guide - Page 5
Replacing the System Battery - setup
View all Dell OptiPlex GX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Orient the battery with the side labeled "+" facing up (see Figure 1). Then insert the battery into the socket, and snap it into place. Figure 1. Replacing the System Battery 1 Battery 2 Battery socket 6. Replace the AGP card brace. 7. Replace the computer cover, reconnect your computer and peripherals to their electrical outlets, and turn them on. 8. Enter System Setup, and confirm that the battery is operating properly. Enter the correct time and date through System Setup's System Time and System Date options. Also, use the copy you made in step 1 of the system configuration information to restore the correct settings for other System Setup options. Then exit System Setup. 9. Turn off and unplug your computer. Leave the computer turned off for at least 10 minutes. 10. After 10 minutes, plug in the computer, turn it on, and enter System Setup. If the time and date are still incorrect, see "Getting Help" for instructions on obtaining technical assistance. Back to Contents Page