Dell PowerEdge C6220 II Hardware Owners Manual - Page 106
Table 2-1., The D4 Token Table
View all Dell PowerEdge C6220 II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
To change the SETUP option thru BMC memory directly: ./ipmitool raw (Example: ./ipmitool raw 0xc 1 1 3 10 106 42 120 to set IP address of BMC LAN port as 10.106.42.120) Table 2-1. The D4 Token Table Token Setup option Description 002D 002E 0051 Embedded NIC1 Embedded NIC1 N/A Enables the system's primary embedded network interface controller (full-function), including its PXE boot-ROM. Disables the system's primary embedded network interface controller. For the next system boot, set the IPL priority to: USB storage, hard disk, CD/DVD-ROM, RAID, Network (if the devices are available) 0052 N/A 0053 N/A For the next system boot, set the IPL priority to: hard disk then option ROMs (if the devices are available) For the next system boot, set the IPL priority to: Network, hard disk, RAID,USB storage, CD/DVDROM (if the devices are available) 0054 N/A For the next system boot, set the IPL priority to: CD/DVD-ROM, USB Storage, hard disk, RAID, Network (if the devices are available) 005C N/A Enables the BIOS remote update on the next reboot, to search for an operating-system initiated BIOS update image. 005D N/A Disables the BIOS remote update on the next reboot, to search for an operating-system initiated BIOS update image. 006E Embedded NIC1 Enable the system's primary embedded network interface controller, but don't enable the NIC's associated PXE or RPL boot-ROM. 106 | Using the System Setup Program