Dell PowerEdge C6220 II Hardware Owners Manual - Page 121
Default, Set PXE boot from on-board NIC then Add-on - motherboard
View all Dell PowerEdge C6220 II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Token 4851 4852 4853 4854 4855 4856 4857 4858 4859 485A 485B 485C 485D 485E Setup option Description Mezzanine Slot ASPM NB-SB Link ASPM Controls the level of ASPM supported on Mezzanine Slot. L0s entry downstream and L1 enabled. Controls the level of ASPM supported on the NB-SB. All entry disabled. NB-SB Link ASPM Controls the level of ASPM supported on the NB-SB. L1 entry enabled. Maximum Payload Size Auto detects the PCI-E maximum payload size. Maximum Payload Size Maximum Payload Size Sets the PCI-E maximum payload size to 128 Bytes. Sets the PCI-E maximum payload size to 256 Bytes WHEA Support Disables Windows Hardware Error Architecture. WHEA Support Enables Windows Hardware Error Architecture. NIC Enumeration Default, Set PXE boot from on-board NIC then Add-on NIC adapter. NIC Enumeration Set PXE boot from Add-on NIC adapter then on-board NIC. PCI-E Generation Set the PCI signaling rate at Gen3 8.0 Gigabits bandwidth. PCI-E Generation Set the PCI signaling rate at Gen2 5.0 Gigabits bandwidth. PCI-E Generation Set the PCI signaling rate at Gen1 2.5 Gigabits bandwidth. Reboot on WOL Disables the ROW in default, Reboot on WOL(ROW) is (ROW) a feature which repurposes the traditional Wake on LAN (WOL) signal to reboot the motherboard. During system is in S0/S3 state, when a WOL packet is received by the NIC, the wake‐up signal generated by the NIC shall cause a hardware reboot of the motherboard. Using the System Setup Program | 121