Dell PowerEdge C6220 II Hardware Owners Manual - Page 246
Remove the screw that secures the power cable cover to the upper
View all Dell PowerEdge C6220 II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 246 highlights
Figure 3-76. Removing and Installing the Middle-Wall Bracket 1 middle-wall bracket 2 screw (6) 7 Disconnect all the cables from the upper middle plane. Note the routing of the cable on the chassis as you remove them from the system. You must route these cables properly when you replace them to prevent the cables from being pinched or crimped. 8 Remove the screw that secures the power cable cover to the upper middle plane. See Figure 3-77. 9 Lift it up straight from the locking hole on the upper middle plane. Then, lift it completely out of the upper middle plane. See Figure 3-77. 246 | Installing System Components
246
|
Installing System Components
Figure 3-76.
Removing and Installing the Middle-Wall Bracket
1
middle-wall bracket
2
screw (6)
7
Disconnect all the cables from the upper middle plane.
Note the routing of the cable on the chassis as you remove them from
the system. You must route these cables properly when you replace
them to prevent the cables from being pinched or crimped.
8
Remove the screw that secures the power cable cover to the upper
middle plane. See Figure 3-77.
9
Lift it up straight from the locking hole on the upper middle plane.
Then, lift it completely out of the upper middle plane. See Figure 3-77.