Dell PowerEdge C6220 II Hardware Owners Manual - Page 86
Embedded SATA Controller
View all Dell PowerEdge C6220 II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Option Embedded SATA Controller (AHCI default) Description Off - Disables the SATA controller. The token applies to the first on-board SATA controller. IDE - Enables the SATA controller. Sets the device class code as IDE and uses PCI IRQ (referred as Native mode). This token applies to the first on-board SATA controller. AHCI - Enables the SATA controller. Sets the device class code as SATA and sets up the AHCI BARs and registers. This token applies to the first on-board SATA controller. RAID - Enables the SATA controller. Sets the device class code as RAID and executes the RAID Option ROM. This token applies to the first on-board SATA controller. 86 | Using the System Setup Program
86
|
Using the System Setup Program
Option
Description
Embedded SATA Controller
(
AHCI
default)
Off
–
Disables the SATA controller. The token applies
to the first on-board SATA controller.
IDE
–
Enables the SATA controller. Sets the device
class code as IDE and uses PCI IRQ (referred as Native
mode). This token applies to the first on-board SATA
controller.
AHCI
–
Enables the SATA controller. Sets the device
class code as SATA and sets up the AHCI BARs and
registers. This token applies to the first on-board SATA
controller.
RAID
–
Enables the SATA controller. Sets the device
class code as RAID and executes the RAID Option
ROM. This token applies to the first on-board SATA
controller.