Dell PowerEdge C6220 II Hardware Owners Manual - Page 156
degrees upward until the processor is released from the socket. See
View all Dell PowerEdge C6220 II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
2 Remove the heat sink, see "Removing the Heat Sink" on page 153. CAUTION: The processor is held in its socket under strong pressure. Be aware that the release lever can spring up suddenly if not firmly grasped. 3 Position your thumbs firmly over the processor socket-release levers and release the levers from the locked position. Rotate the levers 90 degrees upward until the processor is released from the socket. See Figure 3-14. 4 Rotate the processor shield upward and out of the way. See Figure 3-14. 5 Lift the processor out of the socket and leave the socket-release levers up so that the socket is ready for the new processor. See Figure 3-14. CAUTION: Be careful not to bend any of the pins on the CPU socket when removing the processor. Bending the pins can permanently damage the system board. Be sure to properly align the process or notch to the socket and insert straight down. Do not move from side to side. Figure 3-14. Removing and Installing a Processor 1 processor shield 3 notch in processor (4) 5 socket-release lever (2) 2 processor 4 socket key (4) 6 CPU socket 156 | Installing System Components