Dell PowerEdge C6220 II Hardware Owners Manual - Page 205

Removing the 1GbE Mezzanine Card NOTE: The 1GbE mezzanine card is seated in PCI-E Gen3 x8 mezzanine slot 3 on the system board, which is not active in a one-processor configuration. See "C6220 II System Board Connectors" on page 305 and "C6220 System Board Connectors" on page 306 for the location. CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Remove the system-board assembly. See "Removing a System-Board Assembly" on page 149. 2 Disconnect all the cables from the 1GbE mezzanine card. 3 Remove the screws that secure the expansion-card bracket. See Figure 3-49 for 1U node. See Figure 3-19 for 2U node. 4 Lift the expansion-card bracket out of the system-board assembly. See Figure 3-49 for 1U node. See Figure 3-19 for 2U node. Figure 3-49. Removing and Installing the Expansion-Card Bracket Installing System Components | 205