Dell PowerEdge C6220 II Hardware Owners Manual - Page 320

Jumper Settings CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. System Configuration Jumper Settings on the C6220 II System Board The function of system configuration jumper installed on each C6220 II system board is shown below: Figure 5-18. System Configuration Jumpers on the C6220 II System Board Table 5-1. System Configuration Jumper on the C6220 II System Board Jumper Function Off NVRAM clear *Disable Jumper Function Pin1-2 PWRD_EN *Enable On Enable Pin2-3 Disable NOTE: The * in the table of system configuration jumper describes the default status and the default state is not active state. 320 | Jumpers and Connectors