Dell PowerEdge C6220 II Hardware Owners Manual - Page 281
Installing the Sensor Board for 3.5 H
View all Dell PowerEdge C6220 II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 281 highlights
8 Remove the screw that secures the sensor board to the hard drive cage. See Figure 3-103. 9 Remove the sensor board from the hard drive cage. See Figure 3-103. Figure 3-103. Removing and Installing the Sensor Board 1 sensor board 2 screw Installing the Sensor Board for 3.5" Hard-Drive System CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Replace the sensor board into the hard drive cage. See Figure 3-103. 2 Replace the screw that secures the sensor board to the hard drive cage. See Figure 3-103. 3 Connect the sensor board cable to the sensor board. See Figure 3-104. 4 Replace the hard drive cage into the chassis. See Figure 3-92. 5 Replace the screws that secure the hard-drive cage to the chassis. See Figure 3-91. Installing System Components | 281