Dell PowerEdge C6220 II Hardware Owners Manual - Page 252

4 Secure the screws that secure the power cables to the lower middle plane. 5 Replace the power cable cover to the lower middle plane. 6 Place the middle plane holder into the chassis. See Figure 3-81. 7 Replace the screws that secure the middle plane holder to the chassis. See Figure 3-81. 8 Place the mid-plane holder support into the chassis. See Figure 3-80. 9 Replace the screws that secure the mid-plane holder support to the chassis. See Figure 3-80. 10 Place the upper middle plane on the mid-plane holder. See Figure 3-79. 11 Replace the screws that secure the middle plane to the middle plane holder. See Figure 3-79. 12 Connect all the cables to the upper middle plane. You must route these cables properly on the chassis to prevent them from being pinched or crimped. 13 Secure the screws that secure the power cables to the upper middle plane. 14 Replace the power cable cover to the upper lower middle plane. 15 Place the middle-wall bracket into the chassis. See Figure 3-76. 16 Replace the screws that secure the middle-wall bracket to the chassis. See Figure 3-76. 17 Replace the cooling-fan cage. See Figure 3-67. 18 Replace the cooling fans. See "Installing a Cooling Fan" on page 234. 19 Replace the system-board assemblies. See "Installing a System-Board Assembly" on page 150. 20 Close the system, see "Closing the System" on page 231. 21 Reconnect the system to its electrical outlet and turn on the system, including any attached peripherals. 252 | Installing System Components