Dell PowerEdge C6220 II Hardware Owners Manual - Page 109

Token 0122 0135 0137 0138 0139 013E 013F 0140 0141 014A 014B Setup option Description SATA Port5 Sets the 6th Serial ATA drive controller to Auto (enabled if present, POST error if not present). Embedded Disables the SATA controller. The token applies to the first SATA Controller on-board SATA controller. Embedded Enables the SATA controller. Sets the device class code as SATA Controller IDE and uses PCI IRQ (referred as Native mode). This token applies to the first on-board SATA controller. Embedded Enables the SATA controller. Sets the device class code as SATA Controller SATA and sets up the AHCI BARs and registers. This token applies to the first on-board SATA controller. Embedded Enables the SATA controller. Sets the device class code as SATA Controller RAID and executes the RAID Option ROM. This token applies to the first on-board SATA controller. Memory Remapping Memory remapping relocates memory space behind PCI hole to the space above 4G with this feature disabled. (3GB~4GB) Memory Remapping Memory remapping relocates memory space 3G~4G to the space above 4G with this feature enabled. (3GB~4GB) Execute-Disable When disabled, Intel processors that support the (XD) Bit Capability eXecute Disable (XD) feature will not report the support to the operating system. Execute-Disable (XD) Bit Capability When enabled, Intel processors that support the eXecute Disable (XD) feature will report the support to the operating system. If the operating system supports this extended paging mechanism, it will provide some protection against software viruses that exploit buffer overflows. Virtualization Technology This feature will allow the users to disable the VT technology in applicable processors. If disabled, the VT feature is unusable in any OS. Virtualization Technology This feature will allow the users to enable the VT technology in applicable processors. Using the System Setup Program | 109