Dell PowerEdge C6220 II Hardware Owners Manual - Page 122
USB PORT
View all Dell PowerEdge C6220 II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
Token 485F 4860 4861 4870 4871 4873 4877 4878 4879 487A 487B 487C 487F 4880 4881 Setup option Description Reboot on WOL Enables the ROW, Reboot on WOL(ROW) is a feature (ROW) which repurposes the traditional Wake on LAN (WOL) signal to reboot the motherboard. During system is in S0/S3 state, when a WOL packet is received by the NIC, the wake‐up signal generated by the NIC shall cause a hardware reboot of the motherboard. USB PORT with BMC USB PORT with BMC Force PXE Boot only This feature will allow the users to electrically disable the internal USB port which contacts to BMC. This feature will allow the users to electrically enable the internal USB port which contacts to BMC. Disables PXE to be the boot device only. Force PXE Boot Enables PXE to be the boot device only. The system only retrying to boot from PXE device. Active This field controls the number of enabled 16 cores in Processor Cores each processor. By default, the maximum number of cores per processor will be enabled. PCI-E Slot1 This feature will allow the users to electrically disable PCIE Slot1. PCI-E Slot1 This feature will allow the users to electrically enable PCIE Slot1. PCI-E Slot2 This feature will allow the users to electrically disable PCIE PCI-E Slot2. PCI-E Slot2 This feature will allow the users to electrically enable PCIE Slot2. PCI-E Slot3 This feature will allow the users to electrically disable PCIE Slot3. PCI-E Slot3 This feature will allow the users to electrically enable PCIE Slot3. Mezzanine Slot This feature will allow the users to electrically disable Mezzanine Slot. Mezzanine Slot This feature will allow the users to electrically enable Mezzanine Slot. 1st Boot Device Sets Hard Disk as first boot device. 122 | Using the System Setup Program