Dell PowerEdge C6220 II Hardware Owners Manual - Page 230
Opening and Closing the System
View all Dell PowerEdge C6220 II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 230 highlights
Item Cable Onboard mini-SAS cable Onboard SATA cable Power cable From (System Board) Onboard SATA output connector 0 Onboard SATA connectors 4&5 Front panel connector To (Interposer Extender for 2U Node and System Board) SAS/SATA input connector 0 on the system board SAS/SATA input connectors 4&5 on the system board Control connector (J3) on the interposer extender for 2U node Opening and Closing the System WARNING: Whenever you need to lift the system, get others to assist you. To avoid injury, do not attempt to lift the system by yourself. CAUTION: This system must be operated with the system cover installed to ensure proper cooling. CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. Opening the System 1 It is recommended to turn off the system, including any attached peripherals, and disconnect the system from the electrical outlet. 2 Remove the securing screw from the system cover. See Figure 3-66. 3 Press the cover release latch lock. See Figure 3-66. 230 | Installing System Components