Dell PowerEdge C6220 II Hardware Owners Manual - Page 279
See
View all Dell PowerEdge C6220 II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 279 highlights
3 Replace the screws that secure the front-panel assembly to the harddrive cage. See Figure 3-101. 4 Replace the hard-drive cage into the chassis. See Figure 3-92. 5 Replace the screws that secure the front-panel assemblies to the chassis. See Figure 3-92. 6 Replace the screws that secure the hard-drive cage to the chassis. See Figure 3-91. 7 Connect front panel cables to the power distribution board. See Figure 3-104 or Figure 3-107. You must route these cables properly on the chassis to prevent them from being pinched or crimped. 8 Connect all the cables to the backplane. See Figure 3-89 for 3.5-inch hard drives and Figure 3-90 for 2.5-inch hard drives. You must route these cables properly on the chassis to prevent them from being pinched or crimped. 9 Close the system. See "Closing the System" on page 231. 10 Replace the hard drives. See "Installing a Hard Drive into a Hard-Drive Carrier" on page 145. 11 Reconnect the system to its electrical outlet and turn on the system, including any attached peripherals. Installing System Components | 279