Dell PowerEdge C6220 II Hardware Owners Manual - Page 275
Installing the 2.5-inch Hard Drive Backplane for Expander, Configuration
View all Dell PowerEdge C6220 II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 275 highlights
Installing the 2.5-inch Hard Drive Backplane for Expander Configuration CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Replace the backplane for expander configuration to the hard-drive cage. See Figure 3-100 2 Replace the screws securing the backplane for expander configuration to the hard-drive cage. See Figure 3-99 3 Install the expander card assembly to the hard-drive cage. See Figure 398. 4 Replace the screws that secure the expander card assembly to the harddrive cage. See Figure 3-98. 5 Replace the hard-drive cage into the chassis. See Figure 3-97 6 Replace the screws that secure the front-panel assemblies to the chassis. See Figure 3-97. 7 Connect all the cables to the backplane for expander configuration and expander card. See Figure 3-94 and Figure 3-95 for 2.5-inch hard drives expander configuration. You must route these cables properly through the tabs on the chassis to prevent them from being pinched or crimped. 8 Connect front panel cables to the power distribution board. See Figure 3-104. You must route these cables properly on the chassis to prevent them from being pinched or crimped. 9 Replace the screws that secure the hard-drive cage. See Figure 3-96. 10 Close the system, see "Closing the System" on page 231. 11 Replace the hard drives. See "Installing a Hard Drive into a Hard-Drive Carrier" on page 145. Installing System Components | 275