Dell PowerEdge C6220 II Hardware Owners Manual - Page 213

Figure 3-55. Removing and Installing the Mezzanine-Card Bridge Board 1 card bridge board 2 system-board assembly Installing the Mezzanine-Card Bridge Board CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 Install the mezzanine-card bridge board into the mezzanine slot on the system board. See Figure 3-55. 2 Install the mezzanine card. See "Installing the LSI 2008 SAS Mezzanine Card" on page 199, "Installing the 1GbE Mezzanine Card" on page 207 and "Installing the 10GbE Mezzanine Card" on page 211. 3 Install the system-board assembly. See "Installing a System-Board Assembly" on page 150. 4 Reconnect the system to its electrical outlet and turn on the system, including any attached peripherals. Installing System Components | 213