Dell PowerEdge C6220 II Hardware Owners Manual - Page 227
Cable Routing for Onboard SATA Cables 2U Node with 3.5
View all Dell PowerEdge C6220 II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
Cable Routing for Onboard SATA Cables (2U Node with 3.5" HDDs) 1 Connect the onboard SATA cable to the system board, and connect the other end of the cable to the corresponding connectors on the other side of the system board. See Figure 3-63. 2 Connect the onboard SATA cable to the system board, and connect the other end of the cable to the corresponding connectors on the interposer extender for 2U node. See Figure 3-63. 3 Connect the power cable to the system board, and connect the other end of the cable to the corresponding connector on the interposer extender for 2U node. See Figure 3-63. Figure 3-63. Cable Routing for Onboard SATA Cables (2U Node with 3.5" HDDs) Item Cable Onboard SATA cable Onboard SATA cable Power cable From (System Board) Onboard SATA connectors 4&5 Onboard SATA output connector 0 Front panel connector To (Interposer Extender for 2U Node and System Board) SAS/SATA input connector 0 on the system board SATAII connectors 0~2 on the interposer extender for 2U node Control connector (J3) on the interposer extender for 2U node Installing System Components | 227