Dell PowerEdge M520 Dell PowerConnect M6220/M6348/M8024 Switches Configuration - Page 102
Example #1: Allow the Switch to Accept RADIUS-Assigned VLANs, Example #2: Enable Guest VLANs
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Example #1: Allow the Switch to Accept RADIUS-Assigned VLANs The RADIUS server can place a port in a particular VLAN based on the result of the authentication. The command in this example allows the switch to accept VLAN assignment by the RADIUS server. NOTE: The feature is available in release 2.1 and later. console#config console(config)#aaa authorization network default radius Example #2: Enable Guest VLANs This example shows how to set the guest VLAN on interface 1/g20 to VLAN 100. This command automatically enables the Guest VLAN Supplicant Mode on the interface. NOTE: Define the VLAN before configuring an interface to use it as the guest VLAN. console#configure console(config)#interface ethernet 1/g20 console(config-if-1/g20)#dot1x guest-vlan 100 console(config-if-1/g20)# console#show dot1x advanced ethernet 1/g20 Port --------1/g20 Guest VLAN --------- Disabled Unauthenticated Vlan Disabled 102 Device Security