Dell PowerEdge M520 Dell PowerConnect M6220/M6348/M8024 Switches Configuration - Page 111
Example #6 Con MAC Access Group, consoleconfig#interface ethernet 1/g5
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
log mirror redirect vlan Configure logging for this access list rule. Configure the packet mirroring attribute. Configure the packet redirection attribute. Configure a match condition based on a VLAN ID. Enter a four-digit hexadecimal number in the range of 0x0600 to 0xffff to specify a custom Ethertype value. Press enter to execute the command. Enter one of the following keywords to specify an Ethertype (appletalk, arp, ibmsna, ipv4, ipv6, ipx, mplsmcast, mplsucast, netbios, novell, pppoe, rarp). console(config-mac-access-list)#deny any 00:11:22:33:44:55 00:00:00:00:FF:FF log ? assign-queue mirror redirect Configure the Queue Id assignment attribute. Configure the packet mirroring attribute. Configure the packet redirection attribute. Press enter to execute the command. console(config-mac-access-list)#deny any 00:11:22:33:44:55 00:00:00:00:FF:FF log Example #6 Configure MAC Access Group console(config)#interface ethernet 1/g5 console(config-if-1/g5)#mac access-group mac1 ? in Enter the direction . Press enter to execute the command. console(config-if-1/g5)#mac access-group mac1 in ? Enter the sequence number (greater than 0) to rank precedence for this interface and direction. A lower sequence number has higher precedence. Press enter to execute the command. console(config-if-1/g5)#mac access-group mac1 in 6 Device Security 111