Dell PowerEdge M520 Dell PowerConnect M6220/M6348/M8024 Switches Configuration - Page 69
Example 3: Set Up VLAN Routing for the VLANs and Assign an IP Address
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
console(config-if-1/g2)#exit console#configure console(config)#interface ethernet 1/g3 console(config-if-1/g3)#switchport mode general console(config-if-1/g3)#switchport general allowed vlan add 20 console(config-if-1/g3)#switchport general pvid 20 console(config-if-1/g3)#exit Example 3: Set Up VLAN Routing for the VLANs and Assign an IP Address The following code sequence shows how to enable routing for the VLANs and how to configure the IP addresses and subnet masks for the virtual router ports.: console#configure console(config)#interface vlan 10 console(config-if-vlan10)#routing console(config-if-vlan10)#ip address 192.150.3.1 255.255.255.0 console(config-if-vlan10)#exit console#configure console(config)#interface vlan 20 console(config-if-vlan20)#routing console(config-if-vlan20)#ip address 192.150.4.1 255.255.255.0 console(config-if-vlan20)#exit Example 4: Enable Routing for the Switch: In order for the VLAN to function as a routing interface, you must enable routing on the VLAN and on the switch. console(config)#ip routing Routing Configuration 69