Dell PowerEdge M520 Dell PowerConnect M6220/M6348/M8024 Switches Configuration - Page 41
Example #2: Set Interface LLDP Parameters
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Range seconds. console(config)#lldp notification-interval 1000 console(config)#lldp timers ? hold interval reinit The interval multiplier to set local LLDP data TTL. The interval in seconds to transmit local LLDP data. The delay before re-initialization. Press enter to execute the command. console(config)#lldp timers hold 8 reinit 5 console(config)#exit Example #2: Set Interface LLDP Parameters The following commands configure the Ethernet interface 1/g10 to transmit and receive LLDP information. console#configure console(config)#interface ethernet 1/g10 console(config-if-1/g10)#lldp ? notification receive transmit transmit-mgmt transmit-tlv Enable/Disable LLDP remote data change notifications. Enable/Disable LLDP receive capability. Enable/Disable LLDP transmit capability. Include/Exclude LLDP management address TLV. Include/Exclude LLDP optional TLV(s). console(config-if-1/g10)#lldp receive console(config-if-1/g10)#lldp transmit console(config-if-1/g10)#lldp transmit-mgmt console(config-if-1/g10)#exit console(config)#exit Example #3: Show Global LLDP Parameters console#show lldp LLDP Global Configuration Transmit Interval 30 seconds Transmit Hold Multiplier 8 Reinit Delay 5 seconds Notification Interval 1000 seconds Switching Configuration 41