Dell PowerEdge M520 Dell PowerConnect M6220/M6348/M8024 Switches Configuration - Page 77
IPv4 OSPFv2, Enable routing and assign IP for VLANs 70, 80 and 90.
View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
IPv4 (OSPFv2) IPv6 (OSPFv3) Enable routing and assign IP for VLANs 70, 80 and 90. config config interface vlan 70 routing ip address 192.150.2.2 255.255.255.0 exit interface vlan 80 routing ip address 192.130.3.1 255.255.255.0 exit interface vlan 70 routing ipv6 enable exit interface vlan 80 routing ipv6 address 2002::1/64 exit interface vlan 90 routing ip address 192.64.4.1 255.255.255.0 exit interface vlan 90 routing ipv6 address 2003::1/64 exit exit exit Specify a router ID. Disable 1583 compatibility to prevent a routing loop (IPv4-only). config config router ospf router-id 192.150.9.9 no 1583compatibility exit exit ipv6 router ospf router-id 1.1.1.1 exit exit OSPF is globally enabled by default. To make it operational on the router, you configure OSPF for particular interfaces and identify which area the interface is associated with. The following commands also sets the priority and cost for the ports: Routing Configuration 77