Dell PowerEdge M520 Dell PowerConnect M6220/M6348/M8024 Switches Configuration - Page 94

Example 5: Enable IP Helper on an Interface on a Server DHCP and DNS

Get Dell PowerEdge M520 PDF manuals and user guides View all Dell PowerEdge M520 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 94 highlights

Example 2: Configure IP Helper Globally (DHCP) To relay DHCP packets received on any interface to two DHCP servers (10.1.1.1 and 10.1.2.1), use the following commands: console (config)#ip helper-address 10.1.1.1 dhcp console (config)#ip helper-address 10.1.2.1 dhcp Example 3: Enable IP Helper Globally (UDP) To relay UDP packets received on any interface for all default ports (Table 2) to the server at 20.1.1.1, use the following commands: console (config)#ip helper-address 20.1.1.1 Example 4: Enable IP Helper on an Interface on a Server (DHCP) To relay DHCP packets received on interface 2/1 to two DHCP servers, 192.168.10.1 and 192.168.20.1, use the following commands: console(config-if-2/g1)#ip helper-address 192.168.10.1 dhcp console(config-if-2/g1)#ip helper-address 192.168.20.1 dhcp Example 5: Enable IP Helper on an Interface on a Server (DHCP and DNS) To relay DHCP and DNS packets to 192.168.30.1, use the following commands: console(config-if-2/g1)#ip helper-address 192.168.30.1 dhcp console(config-if-2/g1)#ip helper-address 192.168.30.1 dns Example 6: Enable IP Helper on Multiple Interfaces With the following configuration, the relay agent relays: • DHCP packets received on any interface other than 2/5 and 2/6 to 192.168.40.1 • DHCP and DNS packets received on 2/5 to 192.168.40.2 • SNMP traps (port 162) received on interface 2/6 to 192.168.23.1 • Drops DHCP packets received on 2/6 console(config)#ip helper-address 192.168.40.1 dhcp console(config-if-2/g5)#ip helper-address 192.168.40.2 dhcp console(config-if-2/g5)#ip helper-address 192.168.40.2 domain console(config-if-2/g6)#ip helper-address 192.168.23.1 162 console(config-if-2/g6)#ip helper-address discard dhcp 94 Routing Configuration

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
94
Routing Configuration
Example 2: Configure IP Helper Globally (DHCP)
To relay DHCP packets received on any interface to two DHCP servers (10.1.1.1 and 10.1.2.1), use the
following commands:
console (config)#ip helper-address 10.1.1.1 dhcp
console (config)#ip helper-address 10.1.2.1 dhcp
Example 3: Enable IP Helper Globally (UDP)
To relay UDP packets received on any interface for all default ports (Table 2) to the server at 20.1.1.1, use
the following commands:
console (config)#ip helper-address 20.1.1.1
Example 4: Enable IP Helper on an Interface on a Server (DHCP)
To relay DHCP packets received on interface 2/1 to two DHCP servers, 192.168.10.1 and 192.168.20.1,
use the following commands:
console(config-if-2/g1)#ip helper-address 192.168.10.1 dhcp
console(config-if-2/g1)#ip helper-address 192.168.20.1 dhcp
Example 5: Enable IP Helper on an Interface on a Server (DHCP and DNS)
To relay DHCP and DNS packets to 192.168.30.1, use the following commands:
console(config-if-2/g1)#ip helper-address 192.168.30.1 dhcp
console(config-if-2/g1)#ip helper-address 192.168.30.1 dns
Example 6: Enable IP Helper on Multiple Interfaces
With the following configuration, the relay agent relays:
•
DHCP packets received on any interface other than 2/5 and 2/6 to 192.168.40.1
•
DHCP and DNS packets received on 2/5 to 192.168.40.2
•
SNMP traps (port 162) received on interface 2/6 to 192.168.23.1
•
Drops DHCP packets received on 2/6
console(config)#ip helper-address 192.168.40.1 dhcp
console(config-if-2/g5)#ip helper-address 192.168.40.2 dhcp
console(config-if-2/g5)#ip helper-address 192.168.40.2 domain
console(config-if-2/g6)#ip helper-address 192.168.23.1 162
console(config-if-2/g6)#ip helper-address discard dhcp