Dell PowerEdge M710 Fabric OS Command Reference Manual Supporting Fabric - Page 353

ficonShow 2 ficonShow Synopsis Description Displays the contents of the specified FICON database. ficonshow database [fabric] Use this command to display the contents of a FICON database. The ficonShow database operand is the name of the database to display. If the fabric operand is absent, the command displays the members of the named database that are local to the switch on which the command was issued. If the fabric operand is present, it must be entered exactly as shown, and this specifies that all members are displayed, both local and remote. The following information might be displayed, depending on which database you enter and which operands you use with the command: Domain Displays the domain ID. Fabric WWN Displays the fabric WWN. Flag Indicates if the node is valid, not valid, or not current. Flag values are as follows: 0x00 Indicates the node ID of the storage port is valid. 0x10 Indicates the node ID of the channel port is valid. 0x20 Indicates the node ID of the storage port is not current. 0x30 Indicates the node ID of the channel port is not current. 0x40 Indicates the node ID of the storage port for the RNID switch for RLIR is not valid. 0x50 Indicates the node ID of the channel port is not valid. Fmt Displays the record-registration format. FRU Failure Description Indicates the FRU failure type as one of the following: WWN card [unit number] The WWN card. Power Supply [unit number] The Power Supply card. Hardware Slot [unit number] The Hardware Slot. Blower [unit number] The Blower. FRU Part Number Displays the FRU part number. FRU Serial Number Displays the FRU serial number. Incident Count Displays the incident count. This number increases by 1 for each incident within the individual switch. Fabric OS Command Reference 321 53-1001764-02