Dell PowerEdge M710 Fabric OS Command Reference Manual Supporting Fabric - Page 356

2 ficonShow Switch node WWN Switch Port WWN Switch WWN Tag TS Format Time Stamp Type Type Number Displays the switch node world wide name. Displays the switch port world wide name. Displays the switch WWN. Displays the physical identifier for the self-describing node interface. Displays the Time Server format. Displays the timestamp, expressed in date format. Same as Port Type. Displays the type number of the self-describing node. It also describes the machine type. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: database Specify the database to display. This operand is required. Valid values are: RNID Device node identification. LIRR Devices registered to receive link incident reports. Entries can have the following flags: -C* A user-configured LIRR entry defined as current (set with the ficonCfg command). -C A LIRR entry defined by the management server demon as current based on order. -S A LIRR entry defined by the management server demon as secondary. SwitchRNID Switch node identification. RLIR Link incident reports. ILIR Implicit link incident reports. fabric Displays FICON database information for the entire fabric. This operand is optional; if omitted, only local members of the named database are displayed. Examples To display the local RNID database: switch:admin> ficonshow RNID { {Fmt Type PID Registered Port WWN Registered Node WWN flag Parm 0x18 N 502b00 50:05:07:64:01:00:15:8d 50:05:07:64:00:c1:69:ca 0x10 0x200110 Type number: 002064 Model number: 101 Manufacturer: IBM Plant of Manufacture: 02 Sequence Number: 0000000169CA tag: 102b } {Fmt Type PID Registered Port WWN Registered Node WWN flag Parm 324 Fabric OS Command Reference 53-1001764-02