Dell PowerEdge M710 Fabric OS Command Reference Manual Supporting Fabric - Page 789
portShow, To display an FCIP tunnel with FICON disabled
View all Dell PowerEdge M710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 789 highlights
TPerf Option: Off IPSec: Disabled Remote WWN: Not Configured Local WWN: 10:00:00:05:1e:54:b0:ba Peer WWN: 10:00:00:05:1e:54:b1:12 Circuit Count: 4 Flags: 0x00000000 FICON: On FICON XRC: Off FICON Tape Write: On FICON Tape Read: On FICON TinTir Emul: On FICON Dvc Acking: On FICON Read BLK-ID: Off Tape Write Pipe: 32 Tape Read Pipe: 32 Tape Write Devs: 16 Tape Read Devs: 16 Tape Write Timer: 300 Tape Max Chain: 3000000 FICON OXID Base: 0x8000 FICON Debug Flags: 0xf7c80000 To display an FCIP tunnel with FICON disabled: switch:admin> portshow fciptunnel 16 Tunnel ID: 16 Tunnel Description: Admin Status: Enabled Oper Status: Up Compression: On (Moderate) Fastwrite: Off Tape Acceleration: Off TPerf Option: Off IPSec: Disabled Remote WWN: Not Configured Local WWN: 10:00:00:05:1e:55:59:e9 Peer WWN: 10:00:00:05:1e:55:68:05 Circuit Count: 4 Flags: 0x00000000 FICON: Off To display an FCIP tunnel with additional circuit information: switch:admin> portshow fciptunnel 17 -c Tunnel ID: 17 Tunnel Description: Admin Status: Enabled Oper Status: Up Compression: On (Moderate) Fastwrite: Off Tape Acceleration: Off TPerf Option: Off IPSec: Disabled Remote WWN: Not Configured Local WWN: 10:00:00:05:1e:55:59:e9 Peer WWN: 10:00:00:05:1e:55:68:05 Circuit Count: 4 Fabric OS Command Reference 53-1001764-02 portShow 2 757