Dell PowerEdge M710 Fabric OS Command Reference Manual Supporting Fabric - Page 638

2 portAlpaShow portAlpaShow Synopsis Displays the Arbitrated Loop Physical Addresses (AL_PAs) of devices attached to a port. portalpashow [slot/]port Description Use this command to display the AL_PAs of devices connected to a port, and whether these devices are public or private. If the specified port is not an active FL_Port or if no AL_PAs are present, this command prints an error. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: slot For bladed systems only, specify the slot number of the port to display, followed by a slash (/). port Specify the port number to display, relative to its slot for bladed systems. Use switchShow to list valid ports. Examples To display the AL_PAs of a port: switch:user> portalpashow 4/14 AL_PA type AL_PA 0xe2 public 0xe4 type public AL_PA type See Also switchShow 606 Fabric OS Command Reference 53-1001764-02