Dell PowerEdge M710 Fabric OS Command Reference Manual Supporting Fabric - Page 963
The port supports Fibre Channel over Ethernet., F_Port receives 1 FDISK frame
View all Dell PowerEdge M710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 963 highlights
switchShow 2 No_Sync The module is receiving light but is out of sync. In_Sync The module is receiving light and in sync. Laser_Flt The module is signaling a laser fault. Port_Flt The port is marked faulty. Diag_Flt The port failed diagnostics. Lock_Ref The port is locking to the reference signal. Testing The port is running diagnostics. Offline A port connection is not established (for virtual ports only). Online The port is up and running. Proto Protocol support by GbE port. ISCSI The ports supports ISCSI. FCIP The port supports FCIP. FCoE The port supports Fibre Channel over Ethernet. comment Optionally displays one of the following: Copper or Optical Displays which GbE port is currently active: Copper indicates that the RJ45 GbE port is currently active. Only copper connections are accepted (default). Optical indicates that the currently active GbE port accepts both copper and optical connections (SFPs). This parameter is set by the portCfgGeMediaType command, and applies only to the ge0 and ge1 ports on the Brocade 7800. Disabled The port is disabled. Bypassed The port is bypassed (loop only). Loopback The port is in loopback mode. E_Port Fabric port; displays the world wide name (WWN) and name of the attached switch. If the port is configured as an EX_Port, the WWN of the attached switch is the same as the router. F_Port Point-to-point port; displays the WWN of the attached N_Port. If that specific F_Port receives 1 FDISK frame, switchShow displays the total number of NPIV Public ports as 1, for example: F_Port 1 NPort + 1 NPIV devices. G_Port Point-to-point port, but not yet E_Port or F_Port. L_Port Loop port; displays the number of NL_Ports. EX_Port Router port; displays the WWN of the attached edge switch. VF_Port FCoE Virtual F_Port. For these ports, the number of NPIV or external device logins is displayed ("n VN-Port(s)"), instead of the WWN of the internal port. Mirror Port The port is a mirror port. (Trunk master) The port is the master port in a group of trunking ports. (Trunk port, master is port #x) The port is configured as a trunking port; the master port is port #x. (upstream) The E_Port is an upstream path toward the principal switch of the fabric. Fabric OS Command Reference 931 53-1001764-02