Dell PowerEdge M710 Fabric OS Command Reference Manual Supporting Fabric - Page 984

2 sysMonitor none -buffer value Event triggers no action. Specifies the buffer value for in-range behavior. A buffer defines a zone within which event criteria are met, rather than a single threshold value. This operand is optional with the -trigger options and valid only with these options. -nosave Prevents the configuration changes from being saved persistently. This option allows you to make and view changes without overwriting the saved configuration. When you use --config with the -nosave option and the switch reboots your changes will be lost. --apply Applies the custom or default configuration for thresholds, actions, or both. This command allows you to choose between custom and default settings. The specified configuration takes effect upon execution of this command. When you select custom, the saved configuration becomes effective. --cancel Cancels a nonpersistent configurations. This command effectively undoes the -nosave operation without reboot. You must always specify a class and area when you apply or cancel a configuration. Thresholds and alarm levels are optional; if omitted, all nonpersistent configurations for the specified class and area are used. --show Displays the Fabric Watch configuration for the specified class. When used without operands, this command displays the current Fabric Watch configuration for all classes and areas. When used with optional arguments, the output displays partial views or status information. -current_status Displays current values for a specified class or area. This operand is optional and valid only with the --show option. The output includes the class, area, port number, circuit ID (for the Brocade 7800 and FS8-24 only), Value, and State. The State field reports whether the current value is above, in range, or below (info) the configured threshold. If no class or area is specified, this command displays current values for all Fabric Watch classes and areas (not only those configured with this command). The following operands are optional with the --apply, --cancel, and --show options; if omitted, default thresholds are used. -action_level def | cust Configures or displays default or custom action settings. -thresh_level def | cust Configures or displays default or custom thresholds. --config mem | cpu Configures the parameters for monitoring system CPU or memory usage. The following parameters are configurable with this command. -poll Specifies the polling interval in seconds. Valid values are between 10 and 3600 seconds. The default value is 120 seconds. This operand is optional. -retry Specifies the number of retries before Fabric Watch takes action. The default value is 3. -limit Specifies a usage limit as percentage of available resources. 952 Fabric OS Command Reference 53-1001764-02