Dell PowerEdge M710 Fabric OS Command Reference Manual Supporting Fabric - Page 919
Security Level Parameters, set secLevel, Examples, Authentication and Privacy.
View all Dell PowerEdge M710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 919 highlights
snmpConfig 2 sysContact authTraps The contact information for this system (switch). The default value is Field Support. Refer to the definition of sysDescr, sysLocation and sysContact in the system group of MIB-II. The string must be at least 4 characters in length; the maximum length is 255 characters. When enabled, the authentication trap (authenticationFailure) is transmitted to a configured trap recipient in the event that the agent receives a protocol message that is not properly authenticated. In the context of SNMPv1 and SNMPv2c, this means that a request contains a community string that is not known to the agent. The default value for this parameter is 0 (disabled). Security Level Parameters The --show option displays the current SNMP GET security and SNMP SET security levels. Use --set secLevel to modify existing settings: SNMP GET security level Specifies security level for all SNMP GET requests. SNMP SET security level Specifies security level for SNMP SET requests only. Values are: 0 No security. 1 Authentication only. 2 Authentication and Privacy. 3 OFF Examples To display the SNMPv1 configuration: switch:admin> snmpConfig --show snmpv1 SNMPv1 community and trap recipient configuration: Community 1: Secret C0de (rw) Trap recipient: 10.32.147.113 Trap recipient Severity Level: 0 Community 2: OrigEquipMfr (rw) Trap recipient: 1080::8:800:200C:1234 Trap recipient Severity Level: 0 Community 3: private (rw) No trap recipient configured yet Community 4: public (ro) No trap recipient configured yet Community 5: common (ro) No trap recipient configured yet Community 6: FibreChannel (ro) No trap recipient configured yet To set the SNMPv1 configuration of a switch: switch:admin> snmpConfig --set snmpv1 SNMP community and trap recipient configuration: Community (rw): [Secret C0de] Trap Recipient's IP address: [0.0.0.0] 1080::8:800:200C:1234 Community (rw): [OrigEquipMfr] string size must be between 2 and 16 - please re-enter Community (rw): [OrigEquipMfr] Trap Recipient's IP address: [1080::8:800:200C:1230] 10.32.147.113 Community (rw): [private] Trap Recipient's IP address: [0.0.0.0] Fabric OS Command Reference 887 53-1001764-02